List of supported devices:
- SPA9000
- PAP2T
- SPA2102
- SPA3102
- SPA8000
- WRP400
- SPA901
- SPA921
- SPA922
- SPA941
- SPA942
- SPA962
- SPA525G
- WIP310
Profile template:
linksys.cfg
Account parameters:
CPE# should be set to MAC-address of device.
In order to enable auto-provisioning the devices should be configured as follows:
- Provision Enable: Yes
- Resync On Reset: Yes
- Profile Rule: http://%%SIP_PROXY%%/provisioning/linksys-$(MAU).cfg
- where %%SIP_PROXY%% - the IP of environment
An example of profile template:
1234 5 6 7 8 9 10 11 12 13 14 15 16 17 18 | < flat-profile > < Provision_Enable >Yes</ Provision_Enable > < Resync_On_Reset >Yes</ Resync_On_Reset >
|
For more info regarding Linksys provisioning see Cisco Small Business IP Telephony Devices Provisioning Guide.